Quick Answer: In Burbank’s single-family zones, front-setback fences and walls generally top out at 4 feet (hedges there can reach 6 feet), and fences and walls outside the front and street-facing yards can go up to 8 feet, with hedges allowed to 12 feet. Height is measured from the lower of natural or finished grade, front-yard fences generally have to be at least 50% open, and new chain link is not allowed in front or street-facing side yards. Anything taller needs a fence exception permit, which currently costs about $2,000 to apply for. These rules come from Burbank Municipal Code Section 10-1-603.
Why Does Fence Height Matter When You Buy or Sell in Burbank?
Fences are one of the most common things that quietly fall out of compliance. A previous owner adds a lattice topper, builds a solid block wall along the sidewalk, or lets a hedge grow into a privacy screen. None of that shows up on the MLS listing, but it can show up in a code complaint, a buyer’s inspection, or a permit review the next time someone pulls a building permit on the property.
For buyers, the question is whether the privacy you’re paying for is legal and will stay. For sellers, it’s whether something on your lot will become a negotiating point in escrow.
What Are the Maximum Fence, Wall and Hedge Heights in Burbank?
Burbank’s residential fence standards (BMC 10-1-603) set the following limits for single-family zones, including R-1 and the R-1-H horsekeeping zone in the Rancho:
| Where on the lot | Fences and walls | Hedges |
|---|---|---|
| Front yard setback | 4 feet | 6 feet |
| Street-side yard, up to the back of the house | 6 feet (at least half open) or 4 feet (solid) | See BMC 10-1-603 |
| Street-facing side yard, rear of house to rear of lot | 8 feet | See BMC 10-1-603 |
| Outside front and street-facing yards (interior side and rear) | 8 feet | 12 feet |
The code also sets corner-lot visibility rules: every fence, wall and hedge must comply with the corner cutoff provisions in BMC 10-1-1303, so a tall hedge at an intersection corner can be a problem even if it’s within the general height limit.
How Does Burbank Measure Fence Height?
This is where many homeowners get caught. Under BMC 10-1-603, height is measured from the abutting natural grade (before any grading) or the abutting finished grade (after grading), whichever is lower. On a sloped lot, or where a fence sits on top of a raised planter or retaining wall, the measured height can be noticeably taller than what you see from the high side.
What Materials and Designs Are Not Allowed?
- Dangerous wire: barbed, razor and electrified wire are all banned.
- New chain link: not allowed in front yards or street-facing side yards.
- One front fence only: only one wall or fence, including its openings, is allowed in the front setback.
- Openness: front-yard fences generally must be at least 50% open.
- Pilasters: pilasters must be at least 8 feet apart and no more than 18 inches wide.
- Gates: gates follow the same rules as the fence or wall they’re part of.
What About Retaining Walls in the Front Yard?
Retaining walls in the front setback are limited to 30 inches and must be set back 18 inches from the sidewalk, and only two retaining walls are allowed in the front setback. Outside the front yard, retaining walls are capped at 4 feet. If a fence sits on top of a front-yard retaining wall, the total height still can’t exceed 4 feet.
Can You Get Approval for a Taller Fence?
Yes, through a fence exception permit (BMC Article 19, Division 11). Burbank’s FY 2025-26 adopted fee schedule lists a Minor Fence Exception at $2,015.84 and a Major Fence Exception at $2,048.76. Approval isn’t automatic, so a buyer who is counting on adding a tall front wall should treat it as a possibility, not a given.
What Should Buyers Check Before Closing?
- Measure front-yard fences and walls from the low side, not the street side.
- Look for solid front walls over 4 feet, lattice add-ons, and chain link along the street.
- Check corner lots for hedges or walls blocking the visibility triangle.
- Ask the seller whether any fence exception or permit was obtained, and request copies.
- If you’re planning a pool, ADU or horse facilities, confirm the fence you’ll need is allowed.
What Should Sellers Do Before Listing?
Walk the property with your agent before you go on the market. Trimming an overgrown hedge or removing a non-compliant add-on is usually far cheaper than negotiating a credit after a buyer’s inspector flags it. If something is clearly over the limit and expensive to fix, it’s better to know early and price or disclose accordingly. If you’re selling in the Rancho, see the Rancho zoning and rules guide on BurbankRanchoRealtor.com, and for other parts of the city, the neighborhood guides on BurbanksBestNeighborhoods.com.
Frequently Asked Questions
How tall can a front yard fence be in Burbank?
Generally 4 feet in the front setback in single-family zones, and it typically must be at least 50% open. Hedges in the front setback can be up to 6 feet.
How tall can a backyard fence be in Burbank?
Fences and walls outside the front and street-facing yards can be up to 8 feet. Hedges in those areas can be up to 12 feet.
Is chain link fencing allowed in Burbank?
New chain link fences are prohibited in front yards and street-facing side yards. Check with Planning before installing chain link anywhere else on the lot.
How is fence height measured on a sloped lot?
From the lower of natural grade or finished grade next to the fence, so a fence on a raised planter may measure taller than it looks.
Do the same fence rules apply in the Burbank Rancho?
The general residential fence standards in BMC 10-1-603 apply to R-1-H lots too. Horse facilities have their own separate requirements, so check those if you keep animals.
Can I build a wall taller than the code allows?
Only with an approved fence exception permit. The current application fees are a little over $2,000.
Are barbed wire or razor wire allowed on residential fences?
No. Barbed, razor and electrified wire are all banned.
Will an over-height fence stop a sale?
Usually not by itself, but it can become a negotiation point or a condition a lender or buyer wants addressed. It’s best handled before listing.
This article is general information about local rules and state law as of October 2026, not legal, tax or engineering advice. Rules and fees change, so confirm current requirements with the city or a qualified professional before relying on them for a transaction.
About Will Flannigan
Will Flannigan is a California licensed real estate agent (DRE #01951292) and Certified Trust & Probate Specialist (CTPS) with The Nell Team at Equity Union Real Estate. A former attorney, Will brings a background in property management and over a dozen home flips to every transaction, and has been licensed since 2014. A 20+ year resident of Burbank Rancho, Will specializes in Burbank, Altadena, Pasadena, Glendale, and the greater San Gabriel Valley, with fluency in Mandarin serving clients in San Marino and beyond.
Buying or selling in Burbank? A quick walk-through of the fences, walls and other easy-to-miss code items before you list or write an offer can save you a negotiation later. Let’s talk.
📞 (310) 920-1108
📧 flanniganhomes@gmail.com
🌐 willflanniganrealestate.com
📍 4404 Riverside Dr. Suite D, Burbank, CA 91505