Native Oaks on a Glendale Lot: The 6-Inch Rule, the Protected Zone and the 10-Year Building Risk

Quick Answer: Yes. Glendale’s Indigenous Tree Ordinance (Glendale Municipal Code Chapter 12.44) protects native oaks, California bay and California sycamore trees with a trunk 6 inches or more in diameter, measured 54 inches above the ground. You need a permit to cut, remove, relocate or encroach on a protected tree, and to prune a live branch over 2 inches in diameter. Violations can bring civil penalties up to $1,000 per violation, misdemeanor charges, triple damages in some cases, and a building moratorium of up to 10 years. Buyers planning to build or remodel should check for protected trees before making an offer.

Which Trees Are Protected in Glendale?

Common nameScientific name
California Live OakQuercus agrifolia
Scrub OakQuercus berberidifolia
San Gabriel OakQuercus durata var. gabrielensis
Valley OakQuercus lobata
Mesa OakQuercus engelmannii
California BayUmbellularia californica
California SycamorePlatanus racemosa

The trunk is measured 54 inches up from the lowest spot where it meets the ground, and anything 6 inches or wider in diameter is covered.

What Is the “Protected Zone” Around a Tree?

The protected zone is the larger of: the area within the dripline plus one foot beyond it, or one foot out from the trunk for every inch of trunk diameter. So a 24-inch oak has a protected zone extending at least 24 feet from the trunk. Construction, grading or trenching inside that zone counts as encroachment and needs a permit.

What Is Prohibited Without a Permit?

  • Cutting, removing, relocating or encroaching on a protected tree.
  • Pruning a live branch over 2 inches in diameter.
  • Topping, “hat racking,” “lion’s tailing” or shearing.
  • Damaging a tree with fire, toxic substances, equipment or grade changes.
  • Attaching anything that girdles the trunk.
  • Installing irrigation within three feet of the base.

Routine pruning of dead, dying or diseased branches up to 2 inches, removing less than a quarter of the canopy, is allowed. There are also exemptions for emergencies, utility line work, and required fire safety clearance.

How Do You Get a Permit to Remove a Protected Tree?

Apply through GlendalePermits.org. Glendale’s guidelines ask for the trunk diameter, correct species identification, photos, the reason for removal, and, for trees described as diseased, dying or hazardous, a statement from a qualified tree expert. The city may also require a formal tree risk assessment. The Director can approve, approve with conditions, or deny. Replacement trees (24-inch box minimum) or in-lieu fees may be required. All permitted work must be done by a licensed contractor, and some work requires an ISA Certified Arborist. Public Works can be reached at (818) 548-3950.

What Are the Penalties?

  • Civil penalties up to $1,000 per violation, plus administrative penalties set by the City Council.
  • Misdemeanor charges with fines up to $1,000 and/or up to six months in jail.
  • Triple damages for removing a tree after a permit was denied.
  • A building moratorium of up to 10 years on the property.

That last one is the big risk for buyers. A moratorium follows the property, not the person who cut the tree.

What Should Buyers Check?

  • Walk the lot for oaks, bays and sycamores, especially on hillside and canyon properties.
  • Look for stumps or recently removed trees and ask the seller about them.
  • If you plan an addition, pool or ADU, map the protected zones early.
  • Consider an arborist report during your inspection period.

Native trees are common in Glendale’s canyon and foothill neighborhoods. See the guides to Verdugo Woodlands and Adams Hill on GlendalesBestNeighborhoods.com.

What Should Sellers Know?

A healthy mature oak can be a selling point, but buyers who want to build will ask about it. Have any past permits ready. If an inherited property has neglected trees, don’t remove protected trees to “clean up” before listing without a permit. See the inherited house sale checklist on CaliforniaInheritedProperty.com.

Frequently Asked Questions

Which trees are protected in Glendale?

Native oaks (live, scrub, San Gabriel, valley and mesa oak), California bay and California sycamore.

How big does a tree have to be to be protected?

A trunk 6 inches or more in diameter, measured 54 inches above the ground.

Can I prune my oak without a permit?

Routine pruning of dead or diseased branches up to 2 inches is allowed. Cutting live branches over 2 inches needs a permit.

How far does the protected zone extend?

The larger of one foot past the dripline or one foot per inch of trunk diameter.

What happens if someone removes a protected tree illegally?

Penalties can include fines, misdemeanor charges, triple damages and a building moratorium of up to 10 years.

How do I apply for a removal permit?

Through GlendalePermits.org, with species, trunk diameter, photos, and the reason for removal.

Do I need an arborist?

Permitted work must be done by a licensed contractor, and some work requires an ISA Certified Arborist.

Can a protected tree affect what I can build?

Yes. Work within the protected zone needs a permit, which can limit where an addition or ADU goes.

This article is general information about local rules and state law as of October 2026, not legal, tax or engineering advice. Rules and fees change, so confirm current requirements with the city or a qualified professional before relying on them for a transaction.

About Will Flannigan

Will Flannigan is a California licensed real estate agent (DRE #01951292) and Certified Trust & Probate Specialist (CTPS) with The Nell Team at Equity Union Real Estate. A former attorney, Will brings a background in property management and over a dozen home flips to every transaction, and has been licensed since 2014. A 20+ year resident of Burbank Rancho, Will specializes in Burbank, Altadena, Pasadena, Glendale, and the greater San Gabriel Valley, with fluency in Mandarin serving clients in San Marino and beyond.

Buying or selling a Glendale property with mature oaks or sycamores? Let’s make sure the trees are an asset in your sale, not a surprise.

📞 (310) 920-1108
📧 flanniganhomes@gmail.com
🌐 willflanniganrealestate.com
📍 4404 Riverside Dr. Suite D, Burbank, CA 91505

Common Questions

Where exactly is the Burbank Rancho neighborhood?
The Burbank Rancho is a flat, equestrian-zoned residential neighborhood in Burbank, bounded roughly by Alameda Avenue to the north, Riverside Drive to the south, and running between the LA River greenway to the east and Bob Hope Drive/California Street to the west. It is one of the few urban-adjacent neighborhoods in Los Angeles County with active equestrian zoning, and is served by Burbank Unified School District.
The Burbank Rancho is characterized by mid-century California ranch-style single-family homes, most built between the 1940s and early 1960s. Homes feature larger-than-average lots, mature landscaping, and classic architectural details. Many have been updated while preserving their original character. It is one of Burbank’s most distinctive residential neighborhoods.
Yes. The Burbank Rancho offers strong schools, authentic community character, distinctive architecture, and consistent demand from buyers. Homes hold their value well and tend to sell faster than comparable Burbank neighborhoods when properly prepared and priced. It is one of the most desirable residential areas in the San Fernando Valley.
Burbank Rancho single-family homes sold for a median of $1,377,500 from May to October 2026, with 13 of 16 sales between $1 million and $2 million and a top sale of $3.1 million. Prices vary based on square footage, lot size, condition, and views. For a current market analysis of your specific address, contact Will Flannigan at 310-920-1108.

About the Author

Will Flannigan is a Real Estate Agent and Certified Trust & Probate Specialist with The Nell Team at Equity Union Real Estate. A former licensed attorney and longtime Burbank Rancho resident, Will has helped buyers and sellers across Burbank and Greater Los Angeles since 2014. He is a Mandarin speaker and active community organizer. DRE #01951292.

310-920-1108 · flanniganhomes@gmail.com · willflanniganrealestate.com

What could your home sell for?

Let's have a real conversation.

No pressure, no obligation. I’ll give you an honest read on where your home stands in today’s market.